Techno Specs Gadget, Samsung Galaxy, New IMEI, Octopus Box Samsung, Android Jelly Bean, Ulefone Tiger, Chinese Miracle

Kamis, 20 Maret 2014

Nokia X6 Camera Failure Problem Solution - hardware repair solution

Nokia X6 Camera Failure Problem Solution - hardware repair solution - are you surfing on google and finding this blog Techno Specs Gadget ?.. if yes, congratulations you will get updated information about Nokia X6 Camera Failure Problem Solution - hardware repair solution we have collected a lot of information from various reliable sources to make this article, so make sure you read through to finish, please see.

Articles : Nokia X6 Camera Failure Problem Solution - hardware repair solution
full Link : Nokia X6 Camera Failure Problem Solution - hardware repair solution
Article Nokia X6,

You can also see our article on:


Nokia X6 Camera Failure Problem Solution - hardware repair solution

Before using or applying this solution ensure to restore,flash and update,
the device firmware on Nokia X6. Oftentimes camera failure is cause by an interrupted firmware, restoring or flashing it back again will fix the problem. But
if that does not solved the problem you may then proceed to hardware repair troubleshooting, especially
if the device suffered from wet damaged and accidentaly dropped by the user.
The problem may possibly lies on faulty hardware components.



This solution below shows the main camera circuit on Nokia X6 and can be used as a guide to fix and repair camera hardware failure issues.


Nokia X6 Camera Hardware Problem Solution
nokia X6 camera repair solution
Camera Repair Tips:
a) Try to replace a new camera replacement module.
b) Check and clean the camera connector.
c) Do supply voltage measurement on corresponding camera supply voltages (see solution above). You can check this voltages while trying to enable the camera in ON condition.
    There are three voltage converters circuit that feeds voltage to enable the camera. This voltage  ranges are as follows, 1.8volts, 2.8volts and 1.3volts  DC voltages.
     This voltages are converted by a DC to DC converters chip. The chips converts the Battery voltage which is 3.7 volts and drop it down or minimize it to 1.8, 2.8 and 1.3 DC voltage.
  So, ensure that the battery supply voltage is properly feeds to each of the DC converter chips.
If  the battery supply voltage is present and still there is no voltage output you can read on each chip, you may then check or replace the DC to DC converter IC's.

d) If all voltages reading is working good and no problems found, but the problem still exists, you may then proceed to rework or replace the Camera Accelerator IC this chip holds and control the camera data signals before it feeds to the application processor IC.



information about Nokia X6 Camera Failure Problem Solution - hardware repair solution has been completed in the discussion

hopefully the information Nokia X6 Camera Failure Problem Solution - hardware repair solution that we provide can provide benefits for you in finding the information you need

you have finished reading the article about Nokia X6 Camera Failure Problem Solution - hardware repair solution if you want to bookmark or also want to share this information to many people can use the link http://belialslut.blogspot.com/2014/03/nokia-x6-camera-failure-problem.html ok so and thank you.

Tag : ,
Share on Facebook
Share on Twitter
Share on Google+
Tags :

Related : Nokia X6 Camera Failure Problem Solution - hardware repair solution

0 komentar:

Posting Komentar